篇一:英语单位换算
1 inch 英寸=25.4 millimetres 毫米
1 foot 英尺=12 inches 英寸=0.3048 metre 米
1 yard 码=3 feet 英尺=0.9144 metre 米
1 (statute) mile 英里=1760 yards 码=1.609 kilometres 千米
1 nautical mile 海里=1852 m. 米
Square Measure 面积单位:
1 square inch 平方英寸=6.45 sq.centimetres 平方厘米
1 square foot 平方英尺=144 sq.in.平方英寸
=9.29 sq.decimetres 平方分米
1 square yard 平方码=9 sq.ft. 平方英尺
=0.836 sq.metre 平方米
1 acre 英亩=4840 sq.yd.平方码=0.405 hectare 公顷
1 square mile 平方英里=640 acres 英亩
=259 hectares 公顷
Cubic Measure 体积单位:
1 cubic inch 立方英寸=16.4 cu.centimetres 立方厘米
1 cubic foot 立方英尺=1728 cu.in. 立方英寸
=0.0283 cu.metre 立方米
1 cubic yard 立方码=27 cu.ft. 立方英尺
=0.765 cu.metre 立方米
Capacity Measure 容积单位:
Britich 英制
1 pint 品脱=20 fluid oz. 液量盎司
=34.68 cu.in. 立方英寸=0.568 litre 升
1 quart 夸脱=2 pints 品脱=1.136 litres 升
1 gallon 加伦=4 quarts 夸脱=4.546 litres 升
1 peck 配克=2 gallons 加伦=9.092 litres 升
1 bushel 蒲式耳=4 pecks 配克=36.4 litres 升
1 quarter 八蒲式耳=8 bushels 蒲式耳
=2.91 hectolitres 百升
American dry 美制干量
1 pint 品脱=33.60 cu.in. 立方英寸=0.550 litre 升
1 quart 夸脱=2 pints 品脱=1.101 litres 升
1 peck 配克=8 quarts 夸脱=8.81 litres 升
1 bushel 蒲式耳=4 pecks 配克=35.3 litres 升
American liquid 美制液量
1 pint 品脱=16 fluid oz. 液量盎司
=28.88 cu.in. 立方英寸=0.473 litre 升
1 quart 夸脱=2 pints 品脱=0.946 litre 升
1 gallon 加伦=4 quarts 夸脱=3.785 litres 升
Avoirdupois Weight 常衡单位:
1 grain 格令=0.065 gram 克
1 dram 打兰=1.772 grams 克
1 ounce 盎司=16 drams 打兰=28.35 grams 克
1 pound 磅=16 ounces 盎司=7000 grains 谷=0.4536 kilogram 千克
1 stone 英石=14 pounds 磅=6.35 kilograms 千克
1 quarter 四分之一英担=2 stones 英石
=12.70 kilograms 千克
1 hundredweight 英担=4 quarters 四分之一英担
=50.80 kilograms 千克
1 short ton 短吨(美吨)=2000 pounds 磅
=0.907 tonne 公吨
1 (long) ton 长吨(英吨)=20 hundredweight 英担
=1.016 tonnes 公吨
长度单位:
公制到英制换算
Linear Measure 长度单位:
1 millimetre 毫米=0.03937 inch 英寸
1 centimetre 厘米=10 mm. 毫米=0.3937 inch 英寸
1 decimetre 分米=10 cm. 厘米=3.937 inches 英寸
1 metre 米=10 dm. 分米=1.0936 yards 码=3.2808 feet 英尺
1 decametre 十米=10 m. 米=10.936 yards 码 ン7wWW。SPKcn.neTУケ_ま 1 hectometre 百米=100 m. 米=109.4 yards 码
1 kilometre 千米=1000 m. 米=0.6214 mile 英里
1 mile marin 海里=1852 m. 米=1.1500 mile 英里
Square Measure 面积单位:
1 square centimetre 平方厘米=0.155 sq.inch 平方英寸
1 square metre 平方米=1.196 sq.yards 平方码
1 are 公亩=100 square metres 平方米
=119.6 sq.yards 平方码
1 hectare 公顷=100 ares 公亩=2.471 acres 英亩
1 square kilometre 平方公里=0.386 sq.mile 平方英里
Cubic Measure 体积单位:
1 cubic centimetre 立方厘米=0.061 cu.inch 立方英寸
1 cubic metre 立方米=1.308 cu.yards 立方码
Capacity Measure 容积
1 millilitre 毫升=0.002 pint (British) 英制品脱
1 centilitre 厘升=10 ml. 毫升=0.018 pint 品脱
1 decilitre 分升=10 cl. 厘升=0.176 pint 品脱
1 litre 升=10 dl. 分升=1.76 pints 品脱
1 decalitre 十升=10 l. 升=2.20 gallons 加伦
1 hectolitre 百升=100 l. 升=2.75 bushels 蒲式耳 1 kilolitre 千升=1000 l. 升=3.44 quarters 八蒲式耳
Weight 重量单位:
1 milligram 毫克=0.015 grain 谷
1 centigram 厘克=10 mg. 毫克=0.154 grain 谷 1 decigram 分克=10 cg. 厘克=1.543 grains 谷 1 gram 克=10 dg. 分克=15.43 grains 谷
1 decagram 十克=10 g. 克=5.64 drams 打兰 1 hectogram 百克=100 g. 克=3.527 ounces 盎司 1 kilogram 千克=1000 g. 克=2.205 pounds 磅 1 ton (metric ton) 吨,公吨=1000 kg. 千克
=0.984 (long) ton 长吨,英吨=1.1023 短吨,美吨
篇二:服装尺寸英语
服装尺寸表英语词汇
Tops 上衣
bust,bust width (女)胸围,[粤]胸阔
chest,chest width (男)胸围,[粤]胸阔
waist 腰围
bottom,hem,hem opening 下摆,[粤]脚围
waistband width (夹克等上衣)脚围
waistband height (夹克等上衣)脚高
front cross 前胸宽,[粤]前胸阔
across measure 横量,[粤]横度
neck width,neck across 领宽,[粤]领横
neck drop (center back to center front) 领深(后中到前中) front neck drop 前领深
back neck drop 后领深
placket width 门襟宽,[粤]门筒阔
pocket welt width 袋口高
pocket high point 袋尖高(口袋最长的高度)
shoulder across 总肩宽,[粤]肩阔
shoulder length,small shoulder 肩长,[粤]小肩长(单边肩长) armhole(curve) 袖窿,[粤]夹圈(弯量,[粤]弯度)
armhole(straight) 袖窿,[粤]夹圈(直量,[粤]直度) armpit 腋窝,[粤]夹底
sleeve length 袖长
overarm 上袖长
underarm 下袖长
sleeve crown height 袖山高
biceps 袖肥,[粤]袖髀围
upper arm width,sleeve width 袖肥,[粤]袖髀阔
sleeve opening 袖口
cuff width 袖头宽,[粤]鸡英宽
cuff height 袖头高,[粤]鸡英高
elbow width,forearm width 肘宽
center back length 后中长
back cross 后背宽,[粤]后背阔
collar length 领长
collar point spread 领尖距
collar point 领尖长
upper collar height 上级领高
collar band height 领座高,[粤]下级领高
logo meas: edge to side fold 标识位置:边到折边
Bottoms 下装
waist(relax) 腰围(松量,[粤]松度)
waist(stretched) 腰围(拉量,[粤]拉度)
waistband width (裤、裙等下装)腰围
waistband height (裤、裙等下装)腰头高
hip,hip width 臀围,坐围
high hip 上臀围,上坐围
thigh(under crotch),thigh width 髀围,大腿围(裤浪底量) leg opening 裤脚围
knee 膝围
sweep (裙)下摆,[粤](裙)脚围
side seam,outseam length 外长,[粤]侧骨长
inseam length 内长
fly length (裤)门襟长,[粤]钮牌长
fly width (裤)门襟宽,[粤]钮牌宽
front rise 前直裆长,[粤]前浪长
back rise 后直裆长,[粤]后浪长
back yoke height 后约克高,[粤]后机头高
篇三:测量工具中英文对照表
heodolite 经纬仪
Water Level 水位仪
Level Ruler 水平尺
Casing gradienter
Coating thickness Measurer 涂层测厚仪
Ultrasonic thickness measurer 超声波测厚仪
Ultrasonic crack detector 超声波裂纹测试仪
Digital thermometer 数字温度计
radiation thermometer 辐射温度计
Gradient Reader 坡度读数器
Electric spark leak hunter 电火花追踪器
Volometer 万用表
MegaOhmmeter 兆欧表
Earthing resistance Reader 接地电阻读数表
Plug gauge 圆柱塞规
Magnifying glass 放大镜
Plummet 铅锤
Profile projector 投影仪
Pin Gauge 针规(不知道和plug gauge 的区别在哪里,知道的请指正)
Gauge block 块规
dial indicator百分表
A vernier caliper 游标卡尺
Coordinate Measureing Machine(CMM) 三尺元
Pressure gague寸压力计
电度厚度测试仪(Electroplating THK.Tester)
转(扭)力仪(Twisting Meter)
螺纹规(Thread Gauge)
块规(Block Gauge)
环规(Ring Gauge)
力矩计(Torque Meter)
塞规(Plug gage)
高度仪(Altitude gauge)
塞尺/间隙规(Clearance gauge)
千分卡尺(Micrometer Calipers )
“过” -- “不过” 验规(通-止规) [go-no-go gauge]
游标卡尺(Vernier Caliper)
电子卡尺(Digital caliper)
深度千分尺(Depth Micrometer)
销(针)规(Pin Gauge)
投影仪(Projector )
数字高度测量仪(Digital Height Gauge)
表面处理测试仪(Surface Finish Tester)
内/外径千分尺(Inside/outer Micrometer)
洛(威)氏硬度仪[(HRC/HV) Hardness Tester)]
温度计(Thermometer)
孔规(Bore Gauge)
电子称(Electric/digital Balance)
三坐标测试仪 (CMM)
万用表(Multimeter)
温度计:thermometer
台秤:Platform scale
水平仪: spirit level
1.刀口型直尺:knife straigjht edge
2.刀口尺: knife straight edge
3.三棱尺three edges straigjht edge
4.四棱尺four edges straigjht edge
5.条式和框式水平仪
bar form and square levels
6.合像水平仪 imaging level meter
7铸铁平板 cast iron surface plate
8.岩石平板 granite surface plate
9.铸铁平尺cast iron straigjht edge
10.钢平尺和岩石平尺
steel and granite straigjht edge
11.圆度仪 roundness measuring instrument
12.电子水平仪electronic level meter
13.表面粗糙度比较样块铸造表面 roughness comparison specimens cast surface
14.表面粗糙度比较样块磨、车、铣、插及刨加工表面
roughness comparison specimens-ground,turned,bored,milled,shape and planed
15.表面粗糙度比较样块电火花加工表面
roughness comparison specimens spark-erostion machining surfaces
16.表面粗糙度比较样块抛光加工表面
roughness comparison specimens pollshed surfaces
17.接触式仪器的标称特性
18.轮廓profiles
19.轨迹轮廓 traced profile
20.基准轮廓 reference profile
21.总轮廓 total profile
22.原始轮廓 primary profile
23.残余轮廓residual profile
24.触针式仪器stylus instrument
25.感应位移数字存储触针式量仪displacement sensitive,digitally storing stylus instrument
26.触针式仪器的部件stylus instrument components
27.测量环measurement loop
28.导向基准renfence guide
29.驱动器drive unit
30.测头(传感器)probe(pick-up)
31.拾取单元tracing element
32.针尖stylus tip
33.转换器transducer
34.放大器amplifier
35.模/数转换器analog-to-digital converter
36.数据输入data input
37.数据输出data output
38.轮廓滤波和评定profile filtering and evaluation
39.轮廓记录器profile recorder
40.仪器的计量特性metrological characteristics of the instrument
41.静测力的变化change of static measuring force
42.静态测力 static measuring force
43.动态测量力 dynamic measuring force
44.滞后hysteresis
45.测头的测量范围 transmission function for the sine waves
46.仪器的测量范围measuring range of the instrument
47.模数转换器的量化步距quantization step of the ADC
48.仪器分辨力 instrument resolution
49.量程分辨力比range-to-resolution ratio
50.测头线性偏差probe linearity deviation
51.短波传输界限short-wave transmission limitation
52.轮廓垂直成分传输 vertical profile component transmission
53表面粗糙度比较样块抛丸、喷砂加工表面
roughness comparison specimens shot blasted and blasted surfaces
54产品结构几何量计术规范(GPS)geometrical product specifications(GPS) 55表面结构 surface texture
56接触式仪器的标称特性 nominal characteristics of contact instruments
57公法线千分尺micrometer for mearsuring root tangent lenghths of gear teeth 58最大允许误差 maximum permissible error
59圆柱直齿渐开线花键量规 gauges for straight cylindrical involute splines 60齿厚游标卡尺 Gear tooth vernier
calipers
61齿轮渐开线样板the involute master of gear
62齿轮螺旋线样板 the helix master of gear
63矩形花键量规 gauges for straight –sided splines
64测量蜗杆 master worm
65万能测齿仪 universal gear measuring instrument
66万能渐开线检查仪universal involute measuring instrument
67齿轮齿距测量仪gear circular pictch measuring instrument
68万能齿轮测量机 Universal gear measuring machine
69齿轮螺旋线测量仪gear helix measuring instrument
70便携式齿轮齿距测量仪 manual gear circular pitch measuring instrument 71便携式齿轮基节测量仪manual gear base pitch measuring instrument
72立式滚刀测量仪vertical hob measuring instrument
73齿轮双面啮合综合测量仪Gear dual-flank measuring instrument
74齿轮单面啮合整体误差测量仪Gear single-flank meshing integrated error measuring instrument
75梯形螺纹量规 gauges for metric trapezoidal screw threads
76工作螺纹量规work gauges for metric trapezoidal screw threads
77校对螺纹量规check gauges for metric trapezoidal screw threads
78.梯形螺纹量规型式与尺寸 Types and dimensions of metric trapezoidal screw threads
79.普通螺纹量规型式与尺寸 Types and dimensions of gauges purpose screw threads
80.非螺纹密封的管螺纹量规 Gauges for pipe threads prcessure-tight joints are not made on the threads
81.螺纹千分尺
Screw thread micrometer
82.最大允许误差 maximum permissible error
83.间隙螺纹量规 Clearance screw gauge
84.量针
Bar gauge
85.螺纹样板 Screw thread template
86.用螺纹密封的管螺纹量规
Gauges for pipe threads where pressure-tight joints are made on the threads
87.刀具预调测量仪? 精度
Accuracy of the presetting instrument
88.薄膜式气动量仪
Membrane type pneumatic measuring instrument
89.光栅线位移测量系统
Grating linear displacement measuring system
90.光栅角位移测量系统
Grating angular displacement measuring system
91.磁栅线位移测量系统
Magnet-grid linear displacement measuring system
92.量块附件
Accessories for gauge blocks
93.V形架
Vee blocks
94.比较仪座
Comparator stand
95.磁性表座